Sensio Wall
Turn a wall socket you don’t use into an air sensor
One of the hallmarks of Sensio Wall is that it retrofits into any wall socket you aren’t using. Take the old one out, set Sensio Air in its place, and the room starts reporting its air.
About 5 minutes per room · mains powered · Wi-Fi 2.4 GHz
01 · Setup
About five minutes for a qualified electrician
Sensio Wall uses the wall box the old socket leaves behind. There is no new cabling to run and nothing to cut into the wall.
1 · RemoveTake out the old socketSwitch off the circuit and remove the socket you aren’t using. The wall box stays.
2 · ConnectWire in Sensio AirConnect it to the mains in the box and screw it to the box, as you would a switch.
3 · CloseClick the plate onThe cover plate clicks over it with no screws showing. It holds firm and comes off without tools.
4 · Connect to Wi-FiAssign it to a roomSensio Air joins your network and appears in your dashboard under its room.
02 · What it needs
Power from the wall and a Wi-Fi network. That is all.
PowerSensio Air runs from the mains in the wall box. No batteries to charge or replace.
Wi-Fi on 2.4 GHzIt connects over 2.4 GHz Wi-Fi. In hotels we recommend a separate IoT network for in-room devices.
One per roomEach device is assigned to a room, so every reading and every alert says where it comes from.
Landscape or portraitThe plate turns to suit the wall box, in graphite or white.
03 · Your business
See what it does for your business
Each page walks through the rooms, what Sensio Air measures in them and what your teams do with it.
HotelsKnow which rooms had a pet or smoke before the next guest checks in.See hotels
HospitalsPatient rooms, cleaning, occupancy and energy.See hospitals
SchoolsEvery classroom’s air, all day, and when to air it out.See schools
Offices and shopsOffices, shops and clinics, from one dashboard.See commercial buildings
Labs and cleanroomsBiological air monitoring, room by room.See contamination control
Planning your rooms? We’ll set it up with you.
Tell us about your spaces: how many rooms, what is in the walls today and how your network runs. We’ll plan the devices, the Wi-Fi and the setup with you.